![HenryHolsters](/img/default-banner.jpg)
- Видео 148
- Просмотров 405 037
HenryHolsters
Добавлен 5 май 2013
TLR-7 HLX updates and holster compatibility
TLR-7 HLX updates and holster compatibility
Просмотров: 3 245
Видео
Headset review: Beyerdynamics MMX 200 Wireless, Logitech G Pro X2, Hyper X Cloud Wireless III
Просмотров 2133 месяца назад
Comparison of three different models in the sub-$250 price range for use in the shop on zoom/teams calls, and for listening to music while I work.
Air shear setup for Kydex and Boltaron prep and precuts
Просмотров 1943 месяца назад
We prep/cut all our plastic sheet stock on this Tennsmith pneumatic shear. H/T to Armory Plastics for recommending this brand to us. It’s been fantastic!
Henry Holsters: 100% Test Fit, what does that mean?
Просмотров 2985 месяцев назад
We take the time to ensure quality by carefully test fitting every single unit we produce, so that you get the best possible fit, every time.
Henry Holsters: Our All-In Guarantee
Просмотров 1495 месяцев назад
Here's how we stand behind the gear we make! If you break it under normal use, we will repair or replace it, for free, forever.
PHLster Enigma Tegris Belt End design details, adjustments and routing options.
Просмотров 2236 месяцев назад
Overview of design improvements on the Tegris Belt End as well as four routing methods for your belt webbing, depending on which version of the Tegris Belt End you have...
Wilson Combat P365 X Macro "Short" Grip Module Fit Issues
Просмотров 4,6 тыс.7 месяцев назад
Demonstrating the fit issues caused by the rail and dustcover dimensions on the Macro Short short module.
PHLster Floodlight 2 Left Hand Conversion Process
Просмотров 1937 месяцев назад
PHLster Floodlight 2 Left Hand Conversion Process
Henry Holsters Flint Holster Strongside Carry Adjustments and Attachment Options
Просмотров 3637 месяцев назад
Henry Holsters Flint Holster Strongside Carry Adjustments and Attachment Options
Ember holster setup and drawstroke details: Understanding retention points and adjustments
Просмотров 5097 месяцев назад
Ember holster setup and drawstroke details: Understanding retention points and adjustments
PHLster City Special Enigma Express hardware stack and assembly
Просмотров 1517 месяцев назад
PHLster City Special Enigma Express hardware stack and assembly
Springfield Hellcat and Hellcat Pro details
Просмотров 1,1 тыс.7 месяцев назад
Springfield Hellcat and Hellcat Pro details
AIWB vs IWB: Kydex Holster features and nomenclature.
Просмотров 1,5 тыс.9 месяцев назад
Why are some holsters called AIWB, some called IWB, and some called both? Can't you use any holster in either position? Not exactly, and here's why.
Helios Light Carriers and Bladetech Tek Loks: Why we don't recommend pairing them...
Просмотров 15010 месяцев назад
Helios Light Carriers and Bladetech Tek Loks: Why we don't recommend pairing them...
IWB Kydex holsters, 1 clip vs 2 clip setups and concealment trade offs
Просмотров 3,4 тыс.11 месяцев назад
IWB Kydex holsters, 1 clip vs 2 clip setups and concealment trade offs
Robinair 15800 fitting installation
Просмотров 47211 месяцев назад
Robinair 15800 fitting installation
Paracord Leg Leash Options for the PHLster Enigma and Enigma Express
Просмотров 2 тыс.Год назад
Paracord Leg Leash Options for the PHLster Enigma and Enigma Express
Holster Hackathon: cutting down a full sweatguard on a Kydex holster
Просмотров 2,2 тыс.Год назад
Holster Hackathon: cutting down a full sweatguard on a Kydex holster
Holster Hardware: spacer and washer terminology, materials and applications
Просмотров 247Год назад
Holster Hardware: spacer and washer terminology, materials and applications
PHLster Reduced Buckle Kit slider bar removal and reassembly
Просмотров 244Год назад
PHLster Reduced Buckle Kit slider bar removal and reassembly
Kydex Holster Design Details: Sweatguards
Просмотров 169Год назад
Kydex Holster Design Details: Sweatguards
Henry Holsters Mk5 Keel Extender features and applications.
Просмотров 765Год назад
Henry Holsters Mk5 Keel Extender features and applications.
Springfield Hellcat and Hellcat Pro Ember holster for TLR7 Sub, with rail clamp and slot key info
Просмотров 8 тыс.Год назад
Springfield Hellcat and Hellcat Pro Ember holster for TLR7 Sub, with rail clamp and slot key info
PHLster Enigma OS Standard Kit Contents Update, Spring 2023
Просмотров 260Год назад
PHLster Enigma OS Standard Kit Contents Update, Spring 2023
PHLster Enigma OS Light-Bearing Kit Contents Update, Spring 2023
Просмотров 397Год назад
PHLster Enigma OS Light-Bearing Kit Contents Update, Spring 2023
There is an option to buy only 1913 rail clamp and modify tlr7 sub? I'm asking, because I bought Sig rail for my P365, fits perfectly, but soon I would like to buy P365 FUSE and there is also propably 1913 rail, like in XMACRO ;/
I was looking for the reason why TLR 7 Sub did not work in the x macro and the Holster and this video showed me where the error is... Thank you
How does it fit with a fat guy sitting
How can I order for you
from our website, www.henryholsters.com
I need a sig fuse tlr-7hlx holster
Does your TLR7 Sub sit crooked in the pistol frame? Take a look at how the light lines up with your trigger guard.
Thanks for taking the time to clear the smoke before the fire even started! Awesome explanation, and the holsters speak for themselves 😂
Love it all I want for my Glock
Why is no one saying that they can just mod a TLR7a holster to an open ended setup, Specially if the main difference is just the light shroud?!
Because in many cases, that isn't true. On lots of light-bearing holsters, the kydex molded over the end of the light bezel is main thing that controls the insertion depth of the firearm into the holster. If you cut that away, or remold it to allow a longer bezel through, the gun may no longer register at the intended depth and may not engage properly with the retention features of the holster. Also, if the bezel is poking out of the end of the holster, the entire firearm is much more susceptible to being bumped up out of place, potentially exposing the trigger while the gun is still in the holster.
You just saved me time/money. TY so much this!
They need to make a bottom mount mono block that’s tuckable.
What would that get you that a pair of Mod4s doesn't get you?
I’m assuming this works for the 356 axg legion since it’s basically the same gun?
No, it doesn't. Sig made the rail position on the AXG Legion lower than on the polymer version, so the light sits in a different position, and will not fit the holster properly. It's frustrating, but very typical of Sig.
@@HenryHolsters oh, that’s good to know! So based on your video, I should be ok with just the light. Thanks for saving me a headache and a few bucks.
Does the tlr7 hlx fit on sub guns like glock 43x and sig 365x?
No. Those guns are only compatible with the TLR-7 Sub
Glad you took time to explain this, as im on fence about to even buy an wml or keep running my edc light with my edc carry. Finding holsters is the pain. And the info about those duty lights got me really thinking.
thanks
Anything otw for the Hellcat Pro w this light? TLR-7HLX
Not yet.
Drop the hlx for macro😢
Thanks for clearing up the confusion!
Great video. To the point with no bullshit 🙌🏻 I wish more creators would follow your lead!
I want a holster for m&p 2.0 compact 4inch with this light 🙏
I appreciate the enthusiasm, but light-bearing M&P holsters are very low on our priority list for development, so that's unlikely to be available anytime soon.
Can we cut the end of the holster out to hold both light bezels? I don’t even know where the retention is on the tlr7 light
The bezel face is the main stop that controls how far the gun/light can be inserted into the holster, so I would not recommend cutting it away in an attempt to allow the HL-X to fit.
Crazy that they put out a TLR 7 HLX running more lumens and candela than TLR 10.
This new tlr7 is a very nice update I hope they update their tlr1 also
Could you use the DCC SHS clips to angle the holster?
Yes, you could use SHS clips to cant the holster.
Is the whole buckle metal or just the lever. Trying to determine if there are more than one version mine is polymer
Only the lever is metal. The remainder of the buckle is polymer.
@@HenryHolsters thought so the sound in your video made it sound more metal still love my fidlock
The HL-X/RM1 head will not give older TLR7 bodied lights near the same output of the dedicated HL-X body due to drivers/circuitry. Can’t wait to see what you guys have coming out, @henryholsters This new HL-X has met all the hype I put on it and I know your holsters are always solid.
Great at making holsters, but can’t make a RUclips video for ish. Hahah. Turn your camera 90 degrees please.
No.
@@HenryHolsters👏
Sorry to upset your free viewing experience.
What size vacuum pump is best ?
I recommend 8cfm or more, so a Robinair 15800 is the minimum unit I'd suggest
Would you make a TLR7 HLX holster for the Staccato CS?
Good info! Hopefully Streamlight will continue all these different product lines so you aren't sitting on obsolete tooling.
Thanks for the update, great video.
Love the honesty at the end of video, not my favorite part either.
How long until we can get a spark for g19 w/tlr7hlx
Probably not sooner than 4-6 weeks from now. We have a lot of other projects on our plate.
Thanks for breaking this down. I’ve been curious what’s new with the newer lights
So what is better the original sheath, or the upgraded Omni sheath?
omni
Will the Pro DCC Mod 4 fit a really super thick Montana Bison Hanks belt?
I don't know. I don't use thick leather belts and don't keep any in the shop for testing, so I can't say for sure.
What key did you use on TLR7 sub 1913 for the p365 x macro?
We designed our own key for that combo, and include it for free with every Ember holster for the xMacro
Did you ever do the video mentioned at the end? I'm experiencing the 1.5" belt vs 1.5"+ clip issue and it sometimes allows the holster tip in such a way it impedes grip access, which I am not a fan of.
Will this holster fit a Hanks belt? They are super thick
I don't know. It might, but super thick gun belts are a challenge. I'd recommend Soft Loops over DCC Mod4 Clips
The shipping automation is very cool. However, I would suggest changing the start with moving the metal folder and retrieving the blue bins. Also, we did ship online orders via USPS but stopped for a few reasons: 1) They were losing packages all the time, 2) we have a daily 4 PM UPS pickup so 99% of orders go out same day 3) we standardized and only ship UPS so no need to fill out different shipping labels and we get a better discount this way.
We've made a bunch of changes since this video, so the layout you see here has been substantially revised. We stick with USPS because the overwhelming majority of our packages are under 1lb, and can travel safely in a padded mailer. UPS simply isn't price-competitive for us in that package class.
@@HenryHolsters Cool. We ship 1 pound all over the country for $10-15
Couldn't have been a more perfect video for me, thanks. I was going to do it without direction and my plan was was much, much worse. Haha
Glad it was helpful, Frank!
Noob here. Just installed this exact model on this exact gun. My thumb seems pretty far from the switch of the light. Is it meant to be closer or are you meant to activate with your trigger finger?
Thanks for sharing oh most bought the wrong one
Are you able to remove the compensator after applying threadlocker?
Yes, but it will require careful removal to not damage the comp. It should be left installed for cleanings, and only removed if you plan to leave it off the gun permanently.
can we get a henry reveal
I made this mistake…
This is helpful thanks
Which TRL for the California version
You'll want the "Sig" labeled TLR-7 Sub that fits the proprietary rail of the P365 and P365XL.
@@HenryHolsters looks like the light sticks out quite a bit farther on the CA Compliant one
@@jasonharrold6686 the video shows a P365XL. The CA compliant P365 has a shorter barrel and slide, but uses the same light.
Excellent explanation. Thanks Brother.
Great video for clarification for sure as I’m new to the scene and trying to do all the research I can